Energy Audit Suprevisor Model GIPS 82
FEATURES
=> State of Art Microcontroller Based Design.
=> Suitable for 1 Phase & 3 phase measurement
=> 2 Solid state Relay Out Put configurable for cutoff setting of any Parameter to give Alarm
=> Rugged portable casing
=> Clamp on CT's
=> Programmable CT & PT Ratio.
=> True RMS measurement.
=> Auto Scrolling Facility.
=> Password protection
=> EEprom retains Energy Parameters on power fail.
=> Monitors Import & Export Energy.
=> Computer Interface ( RS 485) optically isolated
=> Inbuilt Data Logger for storing all Parameters
-with Date & Time stamp for long duration
-Audit without manual intervention / operation.
PARAMETERS
| Volts | : | L – L, L – N ( Per Phase & Avg.) |
| Amps | : | Per Phase & summation |
| Frequency | : | System |
| Power Factor | : | Per Phase & Avg |
| KW | : | Per Phase & Summation |
| KVA | : | Per Phase & Summation |
| KVAr | : | Per Phase & Summation |
| KWh | : | Import, Export & Summation |
| KVArh | : | Capacitive & Inductive |
| KVAh | : | Total |
| THD | : | Volts & Amps |
| Max. Demand | : | KVA / KW |
SPECIFICATION
| System | : | 3 Phase 4 Wire / 3 Phase 3 Wire | |||||||||||||||||||||||||||
| Aux. Supply | : | 230V /110VAC 50 Hz (-20% +15%) | |||||||||||||||||||||||||||
| Burden on Aux. | : | ||||||||||||||||||||||||||||
| Voltage Input | : | 110 / 415 / 440 VAC ( L – L )500Vmax | |||||||||||||||||||||||||||
| Current Input | : | 1 Amps / 5 Amps | |||||||||||||||||||||||||||
| Burden on CT | : | < 0.2 VA | |||||||||||||||||||||||||||
| Communication | : | RS 485 ( Modbus – RTU Protocol ) | |||||||||||||||||||||||||||
| Temp | : | 0 – 55°C | |||||||||||||||||||||||||||
| Humidity | : | < 90% RH ( non condensing ) | |||||||||||||||||||||||||||
| Accuracy | : |
|
|||||||||||||||||||||||||||
| Dimension | : | 455 x 360 x 150 mm ( L x B x H ) |
